(Sold, as of June 3, 2022) Fursuit made for sale (price). Fursuitfeet have the largest possible size and with the minimum size of a fursuiter (see at the end of the page) it can be uncomfortable - so, may be necessary to make smaller fursuitfeet and sandals, and thi is which is paid separately (and costume correction is free).
~~~~~~~~~~~~~~~~~~~~~~~~~~Our fursuits have their own "know-how" and fit like a glove. They are universal for fursuiters of almost any height and width at the waist (it is possible to sew in an additional stretch zone for very "beer tummies").
You can not be afraid to get fat or lose weight - the suit will always fit you.
You don't have to be afraid of shrinking the size of the suit after washing it - our suits have a large margin in width and height.
Our fursuits allow you to wear them on your friends, who can be much taller and wider than you, or vice versa shorter and thinner
- everything will fit perfectly and it so, will bring a lot of pleasure not only to you.
You can also use cold accumulators in a special vest - the overalls will be guaranteed to be worn over this.
The combination is well compressed by a vacuum bag, as it contains synthetic padding of the exoskeleton, and not foam rubber - so, it requires minimal storage space.
~~~~~~~~~~~~~~~~~~~~~~~~~~
- everything will fit perfectly and it so, will bring a lot of pleasure not only to you.
Photoshoot
The photo session is carried out with high-quality medical overalls on the whole body, plus a balaclava, for 15 minutes by time - there is practically no contact between the suit and the "model" (how it was - the photo separately, on request).
DESIGN OF JUMPSUIT |
||||
|
Textile elastic bands are sewn into the jumpsuit, so it sits on the body like a glove: tight and at the same time suitable for almost any body size (within reason). Cushioning zones give a large margin at the waist and unload the fur from heavy loads. The digitigrade's shape is created by a light exoskeleton linings filled synthetic winterizer. It removable Velcro lining, i.e. the linings can be washed separately. Our construction is much lighter than exoskeleton pads from foam rubber, it compresses perfectly during storage and transportation, and also does not tire with its weight when wearing the fursuit.
|
||||
|
||||
| The zipper has a double fastening to the fur (a pair of longitudinal seams) and is well hidden. This is achieved by hemming the edges of the fur inward. | ||||
 |
||||
|
All free edges of the fur are hemmed, which protects the edges from the unraveling of the fabric base.
 |
||||
| To prevent the sleeves from slipping when the arms are raised, cuffs are sewn on them. Accordingly, between the overalls and the paws, the “luminous” hands of the fursuiter are not visible. Furpaws coats are sewn with a certain margin in length - if necessary, it can be cut to the specific length required (used high-quality fur - mink, which can withstand wearing even without hemming the edges). | ||||
 |
||||
|
Cushioning zones are formed by sewing in an elastic band, so that our fursuit fits snugly, like a glove and is universal for fursuiters of different sizes and width. Thus, you can not be afraid to gain weight or lose weight, because the suit will always fit you. No need to be afraid of size reduction due to washing - our suits have a large margin of width and height. Our fur suits allow you to wear it, for example, on a friend who is much taller and wider than you, or vice versa, lower and thinner - the suit will fit perfectly and will bring a lot of pleasure not only to you. The knots of textile elastic bands are glued with fleece so that over time these knots do not untie.
|
||||
 |
||||
HEAD'S DESIGN |
||||
|
The base of the head is made of dense polyethylene foam 1/4 inch (~1 cm) thick, with a steel, stainless wire frame (see section «BUILD EXAMPLES» on our website). Unlike a mask made of foam rubber, our design has a smaller contact area with the head of the fursuiter, it is less hot inside, this material does not rot, does not absorb moisture.
|
||||
 |
||||
 |
||||
 |
||||
|
Photoshoot of the head without a nose's ring and molars - it as an option (some teeth are removable).
|
||||
 |
||||
|
|
||||
|
The fursuit head consists of several parts with internal pads of different sizes for different fursuit head sizes. The mask touches the fursuiter's head at several points, so sweat is not absorbed into the mask as intensively as in foam constructions (in general, when the fan is running, mask is cooler than without mask). The material of the mask does not absorb moisture at all!
The jaw can be easily removed completely, which is convenient for quick drying and cleaning - the fastening is reliable and simple, and no any bolts, nothing for lose. There is enough space in the mask to wear goggles. You can keep the jaw in his place, and leave it fully open (180 degrees) for quick drying. The mask is completely washable. The apron consists of two halves: the front (under the jaw) and the back (actually - the head itself). They are attached to each other with buttons. There are a couple of large pockets on the aprons - for a smartphone, USB-cans and something else that is not very bulky. |
||||
 |
||||
 |
||||
|
The follow eyes are made of sheet white plastic. The transparent part is printed on a perforated banner and raised (tinted) with acrylic. "Eye boxes" do not have sharp corners in visible places, so the joints are not visible (they are hidden in the corners of the eyes).
|
||||
 |
||||
|
The nose is soft, made of the base material of the mask, and covered with fleece. With large through nostrils - for your imagination (we made a ring for an example). Included is a yellow "ring": a fleece sausage with magnetic ends.
|
||||
 |
||||
|
The teeth (as well as the lips) are made of fleece:
- upper teeth and molars - removable, with Velcro; - the lower teeth are glued to the jaw (remember that it can be easily removed from the mask for washing). |
||||
 |
||||
|
There is a removable fan with a built-in converter from 5 to 12 volts, i.e. Power is provided from any USB - power bank, which fits into an apron pocket. The fan is held in place by textile Velcro. When the FUN is in his place, the mouth of the mask stays ajar and your jaw can rest from having to be constantly open for free breathing.
|
||||
 |
||||
|
The head of the fursuit is perfectly ventilated through large holes in the ears - it is cooler inside the mask than without it (when the fan is on).
|
||||
 |
||||
|
Included are tongues of three lengths, fastened with Velcro.
|
||||
 |
||||
TAIL'S DESIGN |
||||
|
The dog's tail is made into a ring. It has a removable fur skin for more convenient washing. A very strong mount is attached to the base of the tail, from a textile tape, under a regular belt.
|
||||
 |
||||
|
For the tail in overalls, a “sleeve” of fur was made for a smooth transition - this is so that the tail does not look like a separate hanging piece.
 |
||||
PAWS DESIGN |
||||
|
On the paws there are soft fleece claws filled with padding synthetic winterizer. Paw pads are dense and voluminous. Comes with sandals with rubber soles. Fur boots are made as left/right - i.e. set slightly apart to make walking easier (so, you don't have to try to spread your legs when walking)
|
||||
 |
||||
 |
||||
|
Inside the paws is a fleece sock that can be turned outside for quick drying or cleaning..
|
||||
 |
||||
|
The tarsi are four-fingered with a false fifth toe. Fleece claws are filled with padding polyester. To make the fingers look plump and not dangle in the hand, the inside of each finger has its own soft lining. Fleece pads are densely filled with padding polyester.
|
||||
 |
||||
 |
||||
 |
||||
 |
||||
| Up |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||