FurR.CluB

Textile elastic bands are sewn into the jumpsuit, so it sits on the body like a glove: tight and at the same time suitable for almost any body size (within reason). Cushioning zones give a large margin at the waist and unload the fur from heavy loads. The digitigrade's shape is created by a light exoskeleton linings filled synthetic winterizer. It removable Velcro lining, i.e. the linings can be washed separately. Our design is much more durable and lighter than foam exoskeleton pads, it compresses perfectly during storage and transportation, and also does not tire with its weight when wearing a suit.

All free edges of the fur are hemmed, which protects the edges from the unraveling of the fabric base.

Cushioning zones are formed by sewing in an elastic band, so that our fursuit fits snugly, like a glove and is universal for fursuiters of different sizes and width. Thus, you can not be afraid to gain weight or lose weight, because the suit will always fit you. No need to be afraid of size reduction due to washing - our suits have a large margin of width and height. Our fur suits allow you to wear it, for example, on a friend who is much taller and wider than you, or vice versa, lower and thinner - the suit will fit perfectly and will bring a lot of pleasure not only to you. The knots of textile elastic bands are glued with fleece so that over time these knots do not untie.

click to enlarge

The base of the head is made of dense polyethylene foam 1/4 inch (~1 cm) thick, with a steel, stainless wire frame (see section «BUILD EXAMPLES» on our website). Unlike a mask made of foam rubber, our design has a smaller contact area with the head of the fursuiter, it is less hot inside, this material does not rot, does not absorb moisture.

Photoset of a head with different ear positions and actually with different ears.

The fursuit head consists of several parts with internal pads of different sizes for different fursuit head sizes. The mask touches the fursuiter's head at several points, so sweat is not absorbed into the mask as intensively as in foam constructions (in general, when the fan is running, mask is cooler than without mask). The material of the mask does not absorb moisture at all!

The jaw can be easily removed completely, which is convenient for quick drying and cleaning - the fastening is reliable and simple, and no any bolts, nothing for lose. There is enough space in the mask to wear goggles.

You can keep the jaw in his place, and leave it fully open (180 degrees) for quick drying. The mask is completely washable.

The apron consists of two halves: the front (under the jaw) and the back (actually - the head itself). They are attached to each other with buttons. There are a couple of large pockets on the aprons - for a smartphone, USB-cans and something else that is not very bulky.

The ears are inserted from the inside of the head, so they cannot be pulled out (to steal) from the outside, and they are kept inside on a Velcro ring. The ears can be glued at any angle, and so that the ears, for example, look back and do not stick out to the sides, the left and right ears need to be swapped with each other.

The follow eyes are made of sheet white plastic. The transparent part is printed on a perforated banner and raised (tinted) with acrylic. "Eye boxes" do not have sharp corners in visible places, so the joints are not visible (they are hidden in the corners of the eyes).

The hare has practically no nose. Anyway, the nose is soft, made of the base material of the mask, covered with fleece.

Teeth, as well as lips, are made of fleece:
- the upper incisors are removable, with Velcro (there are several pieces in stock);
- the lower teeth are glued to the jaw (remember that jaw can be easily removed for the washing mask; one lower incisor is in stock).

There is a removable fan with a built-in converter from 5 to 12 volts, i.e. Power is provided from any USB - power bank, which fits into an apron pocket. The fan is held in place by textile Velcro. When the FUN is in his place, the mouth of the mask stays ajar and your jaw can rest from having to be constantly open for free breathing.

The fursuit's head is perfectly ventilated through a mesh of eyes and small holes in the ears so it is cooler inside the mask with the fan turned on than without it.

There are tongues of three lengths in the kit, although it is not necessary for a hare, but... It Velcro fastening

The tail is made with a removable fur skin for more convenient washing. A very strong attachment is attached to the base of the tail, from a strong tape for a regular belt.

click to enlarge

For the tail in the jumpsuit, a "sleeve" is made of fur for a smooth transition and to hide its fastening.

On the paws there are soft claws made of fleece filled with sintepon. The small pads of the paws are flat. The set includes sandals with lightweight rubber soles.

click to enlarge

Inside the paws is a fleece sock that can be turned outside for quick drying or cleaning.

The paws are four-toed. The fleece claws are filled with sintepon. To make the fingers look plump and not dangle on the hand, the inside of each finger has its own soft lining. The fleece pads-bean are flat and small (because it is a hare).