|
The fursuit's
overalls have a large stock in size and
tied by textile elastic bands. Thus, it fits on a body as tight glove
and at the same time it does not himself exert excessive load when
worn. The collar of overalls is hemmed with fleece for
reliability. Multi-size fursuit makes it easier to sell it,
if you don’t need it anymore.
|
||||||
|
||||||
|
All the fur's free
edges are hemmed and do not stick
out.
 |
||||||
|
A shape sets by a pads for full digitigrade's character. The pads filled by a synthetic winterizer. Pads are removable by Velcro, it can be washed separately. Pads are much lighter than pads from foam rubber - are perfectly compressed during storage and transportation.
|
||||||
 |
||||||
|
The head is made of
½ inch polyethylene foam
with a steel wire frame (see
the section of the site about assembling our fursuits). In
contrast to the mask from foam, our design
has a smaller area of contact with the head of the fursuiter - it is
less hot inside. The ears of the mask
have a large ventilation's vents.
|
||||||
Click to enlarge |
||||||
|
||||||
Click to enlarge |
||||||
|
The eyes are made of
thick white plastic. Drawn with
acrylic (mask can be washed). For greater light reflection of the orbit
inside pasted over by white fleece. The eye's eру rims are
pre-plastered by black fleece.
|
||||||
|
||||||
|
The jaw is opens and
can be removed. This is useful for
quick drying and cleaning the mask from the inside.
|
||||||
 |
||||||
|
The fursuit's head
consists of several parts with pads,
which allowing it to have a multi-dimension.
A tongues are made removable on Velcro. The mask has separate front and rear aprons with cormans sewn to them. Removable fan for 12 volts (requires an adapter of 5 to 12 volts to power it from a powerbank USB) |
||||||
 |
||||||
|
The nose is trimmed
with fleece with nostril imitation inserts and have an edging from
green fleece. The muzzle may have fleece spots.
|
||||||
Click to enlarge |
||||||
|
The teeth are made
from white fleece and not removable.
Lips made from fleece.
A large 3" fan is removable and can move in the mouth to select its comfortable position. The mouth with the fan installed is always slightly open. |
||||||
|
||||||
|
A tail of a
demountable design with fastening from a
strong tape for a usual belt. For the tail in the overalls is made a
“sleeve” from fur, so that the tail does not look
like a separate, hanging piece.
|
||||||
 |
||||||
Paws design |
||||||
|
Finished paws have
soft voluminous fleece pads and equipped with sandals with rubber
sole. The paws have soft claws made from fleece. Inside the
paws there is a fleece sock, which can be turned out for quick drying
or cleaning.
|
||||||
Click to enlarge |
||||||
|
We made multy-size
feetpaws - this is have't boots of a certain size inside. The base is
made of foam rubber. For comfort a feetpaws contain a heel
and side restraints and have very light in weight.
|
||||||
|
||||||
|
Handpaws have
voluminous pads and claws made from fleece - paws with 4-fingered with
false "5 finger".
|
||||||
 |
||||||
 |
||||||
| UP to the beginning | ||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||