FurR.CluB

Textile elastic bands are sewn into the jumpsuit, so it sits on the body like a glove: tight and at the same time suitable for almost any body size (within reason). Cushioning zones give a large margin at the waist and unload the fur from heavy loads. The digitigrade's shape is created by a light exoskeleton linings filled synthetic winterizer. It removable Velcro lining, i.e. the linings can be washed separately. Our construction is much lighter than exoskeleton pads from foam rubber, it compresses perfectly during storage and transportation.

The zipper has a double fastening to the fur (a pair of longitudinal seams) and is well hidden. This is achieved by hemming the edges of the fur inward.

All free edges of a fur are hemmed, which protects the edges from unraveling of a fabric base.

Cushioning zones are formed by sewing in an elastic band, so that our fursuit fits snugly, like a glove and is universal for fursuiters of different sizes and width. Thus, you can not be afraid to gain weight or lose weight, because the suit will always fit you. No need to be afraid of size reduction due to washing - our suits have a large margin of width and height. Our fur suits allow you to wear it, for example, on a friend who is much taller and wider than you, or vice versa, lower and thinner - the suit will fit perfectly and will bring a lot of pleasure not only to you. The knots of textile elastic bands are glued with fleece so that over time these knots do not untie.

click to enlarge

The base of the head is made of dense polyethylene foam 1/4 inch (~1 cm) thick, with a steel, stainless wire frame (see section «BUILD EXAMPLES» on our website). Unlike a mask made of foam rubber, our design has a smaller contact area with the head of the fursuiter, it is less hot inside, this material does not rot, does not absorb moisture.

click to enlarge

The fursuit head consists of several parts with internal pads of different sizes for different fursuit head sizes. The mask touches the fursuiter's head at several points, so sweat is not absorbed into the mask as intensively as in foam constructions. The material of the mask does not absorb moisture at all!

The jaw can be easily removed completely, which is convenient for quick drying and cleaning. The fastening is reliable and simple, and no any bolts, nothing for lose. There is enough space in the mask to wear goggles.

You can keep the jaw in his place, and leave it fully open (180 degrees) for quick drying. The mask is completely washable.

The apron consists of two halves: the front (under the jaw) and the back (actually - the head itself). They are attached to each other with buttons. There are a couple of large pockets on the aprons - for a smartphone, USB-cans and something else that is not very bulky.

The follow eyes are made of sheet white plastic. The transparent part is printed on a perforated banner and raised (tinted) with acrylic. "Eye boxes" do not have sharp corners in visible places, so the joints are not visible (they are hidden in the corners of the eyes).

The nose is soft, made of the base material of the mask, and covered with fleece.

The teeth (as well as the lips) are made of fleece:
- upper teeth - removable, with Velcro;
- the lower teeth are glued to the jaw (remember that it can be easily removed from the mask for washing).

The fan was not manufactured at the request of the owner.

The head of the fursuit is perfectly ventilated through large holes in the ears - it is can cooler inside the mask than without it when the fan is there.

The tiger's tail is made into a unshaven fur - is fluffy. It has a removable fur skin for more convenient washing. A very strong mount is attached to the base of the tail, from a textile tape, under a regular belt.

click to enlarge

For the tail in overalls, a sleeve of fur was made for a smooth transition - this is so that the tail does not look like a separate hanging piece. It is better to insert the tail into this sleeve in advance before putting on the jumpsuit.

On the paws there are soft fleece claws filled with padding synthetic winterizer. Paw pads are dense and voluminous. Comes with sandals with rubber soles (two pairs).

click to enlarge

Inside the paws is a fleece sock that can be turned outside for quick drying or cleaning.

The hand paws are fifth-fingere. The fifth finger can be used, although it is made in the style of a false finger. To make the fingers look plump and not dangle in the hand, the inside of each finger has its own soft lining. Fleece pads are densely filled with padding polyester.

There are the wrist band with adjustment for paws.

Oh. My back is tired now :)