FurR.CluB

FurSuit Sachiko - idea of our friend. The assembly started well - the owner of the character blinded matrix of clay (a dummy) is such, what she had seen of his character. Billets were sealed with adhesive tape. Then, the thin crust from adhesive tape was cut by patterns of the head. Patterns were transferred to the sheet material (Thermoflex) and glued into a soft billet head. The edges of the lips and a little bit inside the head was laid and glued on the hot melt adhesive, a frame made of steel wire. This framework gives a flexible form stiffness desired geometry and durable seating for horns. Horns are made of yellow fleece tightly filled with synthetic padding and painted brown acrylic. Mouth - opening. Limiting the opening angle provide two easily removable textile gum - after removal of the jaws can be opened at 180 degrees, for example, for drying or wiping head inside. The nose was "tricky" folded leatherette, so that there were no seams. The follower eyes were collected from thick plastic. Ears on the frame of Thermoflex, glued to the base of the head into four textile gum and have the ability to bend in any direction without kinks. Scan for fur trim bases head were obtained winding Scotch tape. Details for the apron and overalls were obtained by the same method - the "client" was wrapped Scotch tape. Anthropo form of overalls set lining syntepon - is as a collapsible and easy to transport. Hidden Lock, located at the front - tucked away in a shift pattern fursuit. Handpaws mimic hooves - made of black leatherette. Feetpaws glued an old hostess shoes and have a carcass structure of 15 mm foam, fleece and fur pasted over with soles of 6 mm rubber. Subsequently, the hostess fursuit added the wig and on that manufacture this fursuit was completed.