HEAD'S DESIGN |
 |
|
The jaw can be easily removed completely, which is convenient for quick drying and cleaning. The fastening is reliable and simple, and no any bolts, nothing for lose. There is enough space in the mask for goggles.
The apron consists of two halves: the front (under the jaw) and the back (actually - the head itself). They are attached to each other with buttons. There are a couple of pockets on the aprons - for USB power supply of the fan mainly. |
 |
|
You can keep the jaw on the place, but fully open to 180 degrees for quick drying.
 |
|
The follow eyes are made of sheet white plastic. The transparent part is printed on a perforated banner and raised (tinted) with acrylic. "Eye boxes" do not have sharp corners in visible places, so the joints are not visible (they are hidden in the corners of the eyes).
|
 |
|
The nose is not so soft bc made of the ruber and covered with fleece.
|
 |
|
The teeth (as well as the lips) are made of fleece:
- upper teeth - removable, with Velcro;
- the lower teeth are glued to the jaw (remember that jaw can be easily removed from the mask for washing).
|
 |
|
The head of the fursuit is perfectly ventilated through large holes in the ears.
|
 |
|
Back to project description - is here...
|
| DO YOU HAVE INTERESTING
QUESTIONS? Send it and we will contact you... someday, bc we usually bussy by work, except moment when we selling a ready-made suit, then a respond will be quickly. |
You
can contact me by the old-fashioned way - this is to write to the email
address: > [email protected] and also: Telegram, Twitter, Boosty, Facebook, Instagram. |